Product Specifications

OEM

 

BMW Vehicles:
E60 desde 2005-2010
E63 desde 2005-2010
E64 desde  2005-2010
E65 desde 2005-2008
E81 desde 2007-2011
E82 desde 2007-2013
E85 desde 2006-2009
E87 desde 2004-2011
E88 desde 2007-2014
E90 desde 2005-2011
E91 desde 2005-2011
E92 desde 2007-2011
E93 desde 2007-2013

 

Thanks to this emulator you can check correctness of the action of airbag seat sensor. The emulator is used for diagnostic purposes.

Seat Occupancy Sensor Emulator is used to diagnose damage in the SRS system and allows you to confirm or exclude damage to the mat in the passenger seat.

The emulator connected in place of the original mat sends information to the airbag controller that:
* There is a working mat in the seat
* A passenger sitting on the seat

The emulator should be connected to the car's installation in place of the damaged mat. Find the seat mat connector under the passenger seat and connect the plug to the car's installation.
Cable marking:
Brown - GND (ground)
Green - signal
Red - 12V (power)

Before connecting the emulator use multimeter to check the correct power supply 12V, GND and signal.


Belt emulator is used to diagnosing damage in the SRS system and allows you to confirm or exclude damage to the seat belt buckle in the passenger seat.


Installation instructions:
- under the passenger seat, find the plug with two wires going to the seat belt buckle (black and red)
- unlock the latch and pull the plug out of the connector
- insert the pins from the emulator into the plug socket
- insert the plug back into the connector

Do not place the child seat on the front passenger seat. Passenger airbag during a collision will open. 

 

 

Support:

Skype: ecu-service_mark
Email: support@ecu-service.info